This is a demo store. No orders will be fulfilled.
Armature Assembly 113-010-0024
- System 13
- Funktion: 3/2 NC
- M20x1 ohne O-Ringnut
- Material: Edelstahl
- Nennweite Belüftung: 2,5 mm
- Buy 10 for €46.56 each and save 17%
- Buy 25 for €43.40 each and save 22%
- Buy 50 for €37.30 each and save 33%
The armature assembly or anchor system is the valve piece of nass magnet’s modular solenoid valve system.
An internal stainless steel poppet moves up and down to seal on the top and bottom valve seats. nass magnet provides armatures in multiple sizes depending on the application’s flow requirement. The OD tube sizes range from 7.4mm to 18.2mm and flow ranges from 12 l/min to 165 l/min. The valve seat orifice sizes ranges from 0.6mm to 4.0mm and higher for special applications. Choose the correct material for the application as nass magnet offers tubes in brass and stainless steel.
Four common pneumatic functions are available which include:
- 2/2 normally closed(NC),
- 3/2 normally closed(NC),
- 2/2 normally open(NO) and
- 3/2 normally open(NO).
The seals in the poppet are FKM (standard), but NBR, HNBR, MVQ, EPDM are available for different media and temperatures. Most of our armatures are designed to accept AC and DC voltages. Some armatures are DC only for low watt applications .
nass magnet offers flexibility as the connection to the seat cavity can be with a thread/o-ring seal style or o-ring flange style that requires a mounting plate.
System affiliation | System 13 |
---|---|
Power Level | 3 |
Electrical operating mode | AC/DC |
Connection Type | M20 x1 without O-ring Groove |
pneumatic operating mode | 3/2 NC |
Orifice Size Inlet | 2,5 mm |
Orifice Size Exhaust | 3,0 mm |
Min. Operating Pressure | 0,0 bar |
Max. Operating Pressure | 10,0 bar |
Surface Coating Armature Tube | Without |
Coating of armature | Without |
Sealing material in the armature | FKM |
Initial lubrication | with initial lubrication |
Permissible operating temperature min. | -10 °C |
Permissible operating temperature max. | 170 °C |